Why should I clean my dryer vents?
There's a hidden fire hazard in every home...it's the dryer vent. Over time, the dryer vent fills with the lint that gets by the dryer's lint trap. Here are some facts:
*The Consumer Product Safety Commission estimates that over 15,000 clothes dryer related fires occur every year.
*Accumulation of lint and reduced exhaust air flow provide conditions ripe for a fire. Lint is highly combustible and one of the main ingredients in a recipe for homemade firestarters.
Who needs this service?
Almost everyone with a dyer needs this service! Especially those homes with dryers located on inside walls or those located on 2nd floor laundry rooms. These centralized locations cause dryers to be vented greater distances, sometimes 50 feet or more. This increases the risk for lint buildup and other obstructions that can seriously affect the dryers performance.
If you answer YES to any of these questions, you need your dryer vent cleaned:
1) Does it take more than one cycle to dry your clothes?
2) Is the dryer vent hood flapper able to open?
3) Are the clothes coming out of the dryer hotter than normal?
Our comprehensive lint and debris-removing system includes the Vent Vac, one of the most powerful vacuums in the industry today. We combine this powerful machine with the Cobra II, a powerful rotating brush that enables us to remove almost any type of blockage including bird's nests from your dryer's duct and vent system.
Also, our technicians will inspect your system for any disconnected or damaged vents. We can also tell you if your venting system is up to your manufacturer's recommended specs.
With lower utility bills and the longer life of your dryer and clothing, a dryer vent cleaning will pay for itself. Not to mention the peace of mind you will have in knowing that you have averted a potentially dangerous fire hazard in your home.
Vent Pro only uses the proper techniques with state of the art equipment to ensure your air duct
system is cleaned efficiently and thoroughly. We use two methods depending on the size and design
of the home. This includes either direct contact method or negative air method.
These are the steps we use to properly clean your system:
Step 1) Clean the furnace/air conditioner
*After testing the system for proper operation, we will disconnect the power before opening the unit for safety.
*Vacuum the interior surfaces of the Furnace/Air Conditioner
*Clean the cooling coils with a HEPA vacuum and a coil cleaner
*Clean the Blower unit
Step 2) Clean the supply and return registers and grills
*Remove wall, ceiling and floor registers
*Wash register with cleaner and rinse
Step 3) Clean the supply and return ducts
*Clean all air ducts using powerful duct cleaning equipment
(Direct Contact or Negative Air method)
Step 4) Install electrostatic air filter and odor control products (Optional)
*Decontaminate cleaned ducts with sealant and Odor Deodorize
LET US BE THE SOLUTION TO YOUR INDOOR AIR POLLUTION
If you want a free quote from one of our certified Vent Pro technicians, call us at 309-531-5129.